Error and Warning Messages
This appendix contains reference information on all error and warning messages that can occur in Smartcrypt. An error usually causes the canceling of the task you are performing such as compressing a file. A warning usually indicates that something is wrong, but it is not severe enough to cancel an entire task. It might also be a reminder or query prompt. Smartcrypt will also return any error codes to the shell. If there were no warnings or errors, 0 is returned.
When an error occurs, Smartcrypt displays an error message. The following is a description of each error message.
(E2) Ambiguous option or command specified - XXX.
If you abbreviate an option on your command line, make sure that you are supplying enough characters in the option to delineate it from similarly spelled options. If, for example, you only specify -pr on your command line, Smartcrypt will generate the (E2) error because it cannot determine whether you are specifying the print or preview option.
(E3) Ambiguous sub-option specified - XXX.
If you abbreviate a sub-option on your command line, make sure that you are supplying enough characters in the sub-option to delineate it from similarly spelled sub-options. If, for example, you only specify -sort=na on your command line, Smartcrypt will generate the (E3) error because it cannot determine whether you are specifying the name or natural sub-option.
(E4) Unknown or illegal option - XXX.
The option you specified on the command line is invalid. It does not match any known options. Verify that you typed the option correctly. Check the spelling.
(E5) Unknown or illegal sub-option - XXX.
The sub-option you specified on the command line is invalid. It does not match any known sub-options. Verify that you typed the sub-option on your command line correctly. Verify that you are not using an illegal sub-option (-add -sort=crc). Check the spelling.
(E6) No .ZIP file specified.
There was not a .ZIP file specified on the command line. Smartcrypt does not accept wildcards for .ZIP file name when adding files to a .ZIP archive.
(E7) Can't create: XXX.
Smartcrypt could not create a .ZIP file when fixing. Smartcrypt could not create a volume label on a spanned archive. Smartcrypt could not create a temporary file for a spanned archive. Verify that you have write access to the drive or removable media on which you are creating these files.
(E8) Nothing to do!
You did not do something that is required for a particular task. For example, Smartcrypt could not find the file you are trying to open or access. You might have specified to update a pattern such as *.txt and Smartcrypt did not find any files that matched or that needed updating.
(E9) No file(s) were processed
Smartcrypt cannot find the file you are trying to access. For example, you might be trying to extract files from a .ZIP archive that do not exist in that archive. Verify that the file(s) you specify on the command line exactly match the file(s) in the .ZIP file. If, for example, the file in the archive is stored with path information, and you attempt to extract it but specify only the file name, you will get the (E9) error.
(E10) No files specified for deletion.
There are no files or file patterns specified for deletion on the command line. In lieu of a specified file or file pattern, Smartcrypt will not assume that the user wishes to specify all files.
(E11) Disk full, file: XXX.
The hard disk or floppy disk you are writing to is full. This error occurs when Smartcrypt attempts to write a .ZIP file, or extract a file contained in a .ZIP file to a hard or floppy disk that is full. Free up sufficient disk space and try again.
(E12) Can't find file: XXX.
Smartcrypt cannot find the .ZIP file you specified. This error will only occur when you use commands/options/sub-options that work with existing .ZIP files. Verify that the file is specified correctly. If you are adding files to an archive, verify that you place the .ZIP file name before specifying files to be added on the command line. If the .ZIP file is not in the same directory where you typed the command, make sure to include path information. For example:
(E13) Can't open .ZIP file: XXX.
The named .ZIP file is read-only or locked by another application and cannot be modified. This may also occur on a Network drive if you do not have sufficient access rights to the file to allow you to modify it.
(E14) Can't create archive: XXX.
Smartcrypt is not able to create the archive file. Verify that the destination directory is not full, the archive file does not already exist. If you are creating the file on a network drive, confirm that you have the appropriate rights to the network file system.
(E15) Renaming temporary .ZIP file, saved as: XXX.
Smartcrypt could not rename the temporary file to the specified .ZIP file name. Verify that the destination drive is not full. If you are updating a non-spanned .ZIP file on removable media and the updated archive exceeds the size available on the removable media, you will receive the (E15) error. You will need to recreate the archive for spanning. Keep in mind that you cannot update a spanned archive. If you are creating the file on a network drive, confirm that you have the appropriate rights to the network file system.
(E16) Can't open for write access, file: XXX.
Smartcrypt is unable to write to the specified file or device. Verify that you have write access to the file or that your printer is configured correctly. Additionally if you are using the PKSFXS.DAT file, verify that you have PKSFXSDATA environment variable configured correctly.
(E17) Error encrypting file data.
Smartcrypt encountered a problem with the compressed data that it was trying to encrypt. For example, the disk on which the compressed data was located was bad or corrupt.
(E18) Can't open list file: XXX.
The named list file could not be found. It does not exist, was spelled incorrectly, is not located in the specified directory, or cannot be accessed because the user does not have the appropriate rights to the file.
(E19) Aborted file extract.
Extraction process was terminated by the user while changing disks during a disk spanning operation. The error also occurs on attempting to extract a bad TAR archive.
(E20) Aborted file compression.
Compression process was terminated by the user while changing disks during a disk spanning operation.
(E21) Can't modify a spanned or split .ZIP file
Spanned or split .ZIP files cannot be modified. The archive will need to be recreated.
(E22) Cannot format removable media.
The media cannot be formatted. The media may be write-protected.
(E23) Suboption is too long
The option is too long; that is, longer than 270 characters. See if you can abbreviate the name of the option or its sub-option to make it shorter.
(E26) Device not ready: XXX.
The removable media device is not ready. The disk may not be in the drive properly.
(E27) 2.04g compatibility cannot be used with the option - XXX
Option 204, which creates an archive compatible with Smartcrypt for DOS v. 2.04g, was used with another option that is not supported for that version of PKZIP
(E28) Share violation, file is in use by another process: XXX
The archive XXX is not in a format which Smartcrypt can understand or contains errors. The errors could be caused by many things but usually mean the archive is corrupted.
(E29) Missing sub-option –XXX
Many options require a sub-option to work. In this case, a required sub-option is missing. Add the appropriate sub-option to your command.
(E34) Invalid archive format: <archive name>
The file is not in a format currently supported by PKZIP, or you attempted to use SecureZIP Partner to extract a non-ZIP archive.
(E58) Invalid archive - method not supported.
The archive uses a compression method that currently is not supported.
(E65) Could not encode archive file: XXX.
The file could not be encoded.
(E71) Can't open PKCS#7 file: XXX.
Smartcrypt cannot open the PKCS#7 because the file does not exist, user cannot read the file, or file is not a valid PKCS#7.
(E72) Smartcrypt wanted user input, but silent=input or silent=all was specified
If Smartcrypt needs user input—for example, to say whether files should be overwritten—but -silent=input or -silent=all is specified on the command line to hide Smartcrypt messages and prompts, Smartcrypt halts processing and issues this error.
(E73) Warning configured as an error
The warning immediately preceding this error message has been specified (with the error option) to be treated as a fatal error.
(E75) Incorrect passphrase or certificate not found, unable to open archive: <archive name>
The archive contains encrypted file names that Smartcrypt cannot decrypt. If the archive is passphrase-protected, you must include the passphrase option with the extract command in the command line.
(E76) Cannot open alternate config file: <file name>
The altconfig option was used, but the specified file could not be opened.
(E77) Archive can only support one file inside!
You tried to add more than one file to an archive of a type that cannot contain multiple files. For example, a GZIP archive can contain no more than one file. If you try to create a GZIP archive to contain three files, Smartcrypt displays this error and does not create the archive.
(E78) Unable to FTP archive file: <file name>
Smartcrypt could not transfer the specified file.
(E79) Unable to E-mail archive file: XXX
A problem, perhaps with the network or the mail server, prevented Smartcrypt from emailing the specified file.
(E80) Unable to run anti-virus
Smartcrypt was unable to run the anti-virus scanning program. The anti-virus program did not respond to the command line used to launch the program.
(E81) Possible virus detected
The anti-virus program returned a non-zero value after doing a scan. Most anti-virus programs use this return to indicate the possible presence of a virus.
(E82) Too many recipients, recipient count limited to 3275 certificates
You specified too many recipients for encryption. The ZIP file format limits the number of recipients to 3275.
(E83) Specified SFX cannot extract archive created with the option - XXXX
You tried to create an SFX that is not able to handle a feature turned on by the option XXXX. For example, you tried to create a strongly encrypted DOS SFX, or an SFX that uses FNE.
(E84) Fatal policy error - nnnnn, contact your system administrator
A critical problem has occurred with a policy file or policy certificate. The number is a policy error code to help your administrator resolve the problem.
(E85) Unable to encrypt, no certificates passed -strict check
The strict option was used, and no recipient certificates passed strict checking, so no certificate was available to use to encrypt
(E86) Archive is not signed by a specified verification certificate
The verifysigner option was used to specify one or more certificates, but the archive to be extracted was not signed using any of these certificates
(E87) Certificate not found: XXX
The verifysigner option was used to specify one or more certificates, but not all of the certificates could be found, either locally or in a specified LDAP directory
(E88) Multiple certificates found: XXX
The verifysigner option was used to specify one or more certificates, and multiple certificates were found—probably in an LDAP directory—that matched the criterion XXX
(E89) Policy requires the ZIP archive to be encrypted
A policy requires encryption but no passphrase or recipient was specified
(E90) Policy requires the ZIP archive and/or files to be signed
A policy requires the archive to be signed but no signing certificate was specified or none is available
(E91) Policy prohibits creation of non-ZIP archives
Only ZIP archives can be created when a policy requires encryption or signing
(E92) Timeout error on file: XXX
The timeout period elapsed while Smartcrypt waited for a response from another process before reading or writing more of the specified archive file on a socket or block device
(E93) Timestamp failed
Smartcrypt unable to connect to Internet.
(E94) Can't modify a timestamped .ZIP: <name>
You cannot change an archive (or files in an archive) that has been timestamped.
(E98) Encryption verification failed
You used -verifyencryption and the archive did not satisfy the conditions you specified.
(E99) AE-x encryption cannot be used with the option -[name]
You specified -cryptalg=AE2 along with an incompatible option, such as -recipient or -cd
(E100) Insufficient memory
Insufficient memory is available to process the archive. Try making more memory available to Smartcrypt. If this does not rectify the problem, then the archive may be corrupted. The -fix command may correct the problem. If you receive this message when you try to create a new archive, possibly you are attempting to compress too many files. Reduce the number of files and try again. If you are using a LIST file in your Smartcrypt command, the LIST file may be too large. See "Compressing Files with a List File" in Chapter 4.
(E150) Error reading .ZIP file.
Smartcrypt cannot read the .ZIP file or is unable to read the central directory record. The file might be located on a corrupt disk or part of a disk. This includes floppy disks.
(E155) Too many files in XXX.
Smartcrypt cannot add or extract files in excess of the limit of 16,383 with the 204 option enabled. Reduce the number of files you are trying to process.
(E156) File is now too big for valid zip data.
The .ZIP archive is too large and Smartcrypt is unable to locate the central end record in the .ZIP file. The file is not a valid .ZIP archive or has been corrupted. The fix command may repair the .ZIP file.
(E157) This archive requires a product compliant with ZIP APPNOTE version XX.X
The archive requires a more recent version of PKZIP, or other archiving program, that supports the version of the ZIP file format described in the specified APPNOTE ("application note"). The APPNOTE is a document that is available on the PKWARE Web site.
(E158) Errors encountered reading archive
Smartcrypt was unable to read the archive.
(E171) Unable to encrypt for the Smartkey: [name]
You specified an invalid Smartkey URN. Either the Smartkey doesn't exist, or you don't have access to it.
(E172) Unable to update Smartkey encrypted archive.
Either user is not logged-in or does not have permission to use the Smartkey.
(E173) Unable to create Smartkey
User does not have permission to create new Smartkeys.
(E174) Unable to modify Smartkey
Smartkey name specified incorrectly or user attempted to modify Personal Smartkey.
(E175) Unable to delete Smartkey
User does not have permission to delete Smartkeys.
(E176) Policy conflict
Currently assigned policy requires you to specify (or not specify) a particular option. For example, if policy requires encryption with Smartkey, and this command only defined a certificate.
(E200) FIPS 140 mode is enabled, but archive is not encrypted with a FIPS-approved algorithm
With the fipsmode option, Smartcrypt cannot work with (test, extract, add to, update, view, or open) an archive with encrypted file names that is encrypted using a non-FIPS-approved algorithm.
(E201) FIPS 140 mode is enabled, but encryption requested is not a FIPS-approved algorithm
With the fipsmode option, Smartcrypt cannot use the specified algorithm to encrypt. Use listcryptalgorithms with the fipsmode option on to see FIPS-approved algorithms available.
(E202) FIPS 140 mode is enabled, but signature hash requested is not a FIPS-approved algorithm
With the fipsmode option, Smartcrypt cannot use the specified hashing algorithm. Use listhashalgorithms with the fipsmode option on to see FIPS-approved algorithms available.
(E203) FIPS 140 mode failed to initialize
(UNIX only) FIPS 140 mode could not be initialized for the fipsmode option. The pkzipc binary may be corrupted.
(E204) The specified certificate does not meet the minimum requirements for signing when FIPS mode is enabled
In FIPS mode, RSA and DSA keys must be at least 2048 bits in size in order to sign with them.
(E205) The specified certificate does not meet the minimum requirements for encrypting when FIPS mode is enabled.
In FIPS mode, RSA keys must be at least 2048 bits in size in order to encrypt for them.
(E249) Unable to start agent: [text]
There was a problem starting the Smartcrypt Agent.
(E254) Your evaluation period for Smartcrypt has expired. Please register to continue using this product.
This copy of Smartcrypt is an evaluation version. If you have purchased Smartcrypt and have the serial number, enter it when prompted.
(E255) User pressed ctrl-c or control-break.
This error occurs when you press CTRL+BREAK or CTRL+C in the middle of a Smartcrypt operation.
Sometimes a condition occurs that might cause a task to pause temporarily. This could be something that prevents part of a task from happening, or simply a message or reminder. For several of these conditions, Smartcrypt displays a warning message. When a warning occurs, Smartcrypt returns a value of 1 to the shell.
The following is a description of each warning message:
(W1) Can't create: XXX.
Smartcrypt could not create volume label, file, or directory. Verify that you have appropriate access rights to the file or directory.
(W2) Illegal path or drive specified: XXX.
The file being extracted has an invalid name or path. Verify that you have entered the correct path in your command line and that the file does not contain any inappropriate characters such as a colon or leading slash.
(W3) Warning! This file requires a product compliant with ZIP APPNOTE version XX.X
The file requires a more recent version of PKZIP, or other archiving program, that supports the version of the ZIP file format described in the specified APPNOTE ("application note"). The APPNOTE is a document that is available on the PKWARE Web site.
(W4) File fails CRC check.
It is likely that the file Smartcrypt is trying to extract is corrupt, and was not extracted correctly. For more information, see the CRC section in Appendix D.
(W7) file: XXX already exists. Overwrite (<Y>es/<N>o/<A>ll/ne<V>er/<R>ename/ <Esc>)?
The file(s) you are trying to extract already exists in the location to which you are extracting. By default, Smartcrypt prompts you before overwriting a file.
(W8) Could not open file: XXX.
You may not have the proper permissions to access the file or the file may have been locked by another program while Smartcrypt was trying to access it. If the file is located on a network file system, consult your System Administrator to verify your access rights.
(W9) Could not delete file: XXX.
You do not have the proper permissions to access and delete the file, or another application has the file open. This warning only occurs when the move option is used on the command line.
(W12) Unexpected end of compressed data.
Corrupt data caused Smartcrypt to abort the extraction before it could finish.
(W13) Skipping encrypted file: XXX.
Smartcrypt encountered a file that has been passphrase protected. You need the passphrase to access this file.
(W18) Unknown compression method for file: XXX.
An unfamiliar compression method has been used with the current .ZIP file.
(W19) Could not clear archive attribute on file: XXX.
Smartcrypt could not clear the archive attribute on a file. The file will be compressed but the archive bit cannot be cleared. This warning usually occurs when the add=incremental option is used on the command line.
(W20) Incorrect passphrase for file: XXX.
Verify that you entered the correct passphrase for the file. When a file is passphrase protected, you can only access its contents with the correct passphrase.
(W21) Invalid temporary file directory: <dir>
Smartcrypt creates a temporary file for the file(s) being compressed when updating a .ZIP file. Smartcrypt was unable to create the temporary .ZIP file in the specified location and so used the default temp directory for your system.
(W22) Authenticity Verification Failed!
The Authenticity Verification (AV) information contained in the .ZIP file is corrupt. Failure of AV indicates a file that has been tampered with or damaged. If the file has failed the AV check, the contents are suspect.
(W23) Authenticity Verification Failed!
The stored Authenticity Verification (AV) checksum value did not match the calculated checksum value. The .ZIP file has been tampered with or is perhaps corrupt.
(W26) directory: XXX already exists. Overwrite (<Y>es/<N>o/<A>ll/ne<V>er/<Esc>)?
Assuming the overwrite option is set to prompt, this warning appears when Smartcrypt attempts to extract a directory over an existing directory with the same name. Answering Y at this prompt will update any extended attributes (EAs) stored in the .ZIP file.
(W29) Can't rename temporary file. Saved as XXX.
Smartcrypt cannot rename the temporary archive created when updating an archive. The archive was saved under the specified name.
(W36) Empty passphrase, files will not be passphrase protected.
When trying to passphrase protect your file, you entered a passphrase containing no letters or numbers.
(W37) Can't sign file.
This warning appears when Smartcrypt fails to sign a file using the specified digital certificate. Common reasons are incorrect passphrase for the certificate (not all certificates have passphrases), no private key (certificate needs to have a private key).
(W38) Can't sign central directory.
Smartcrypt failed to sign the central directory. Common reasons are that an incorrect passphrase was supplied to access the certificate (not all certificates have passphrases) or the certificate lacks a private key (needed to apply a digital signature).
(W39) Signature is invalid.
Someone or something has changed the archive since it was digitally signed. For example, the archive may be corrupt.
(W40) Certificate not trusted.
The certificate is currently not to be trusted.
(W41) Certificate expired.
The certificate has expired. This does not necessarily mean that the certificate or signatures applied with it are not to be trusted. They may simply be old.
(W42) Certificate was revoked.
The issuer has revoked the certificate.
(W43) Certificate not found: XXX.
Smartcrypt was unable to find a certificate of that name on the system.
(W45) Bad data in compressed stream.
Something was wrong in the stream of compressed data. The ZIP file is corrupt.
(W46) Encryption algorithm is not available. Using: XXX.
Smartcrypt cannot use the specified algorithm on this system. Use the ListCryptAlgorithms command to view a list of the encryption algorithms that Smartcrypt can use
(W47) No recipients specified. Recipients will not be used.
You specified the recipient option, but did not include any actual recipients (or specified bogus recipients). When this occurs, Smartcrypt will not strongly encrypt files for recipients. If you did not tell it to use passphrases; that is, you did not use the -passphrase option, it will not encrypt files at all. In addition, if you specify passphrase and did not also specify cryptalgorithm, you will not get strong encryption. You will, however, get traditional encryption.
(W48) Invalid item name
The name of an item (file) in the archive is invalid. Possible reasons are: The file has the same name as another file in the same folder; the path name of the archive item contains a file or folder name that exceeds the maximum number of characters allowed (254 for Windows, 255 for UNIX); the name contains characters that may not be used in file names on your operating system (the characters :*?\"<>
" may not be used in file names on Windows).
(W52) Certificate verification failed!
Something is wrong with the certificate.
(W53) Unknown exception caught: Exception code: XXX
An internal error occurred. Please contact PKWARE Technical Support with the exact command you used and the error code.
(W54) Option 'XXX' is not licensed for use in your copy of PKZIP
Your license key does not allow you to use that option. You must purchase an appropriate license key from PKWARE to use it.
(W55) Command 'XXX' is not licensed for use in your copy of PKZIP
Your license key does not allow you to use that command. You must purchase an appropriate license key from PKWARE to use it
(W56) Recipient not found for file: XXX
The file was encrypted only for recipients, and Smartcrypt was unable to find a certificate for any of them. Verify that you have access to the private key for one of the recipients.
(W57) Incorrect passphrase or recipient not found for file: XXX
Verify that you entered the correct passphrase for the file. When an archived file is passphrase protected, you can only access the file if you have the correct passphrase. Passphrases are case sensitive.
(W58) Problem reading .ZIP file: <zipfile name>
The .ZIP archive is corrupted. Smartcrypt can read it, but probably other zipping programs cannot. Use the -fix command to fix the archive so that other programs can read it.
(W59) Multiple certificates found
Multiple digital certificates were found that match the same recipient. These certificates may belong to different people. The archive is encrypted using each of the certificates; the owner of any of them can decrypt.
(W60) Unable to connect to LDAP server: <server name/address>
Smartcrypt was unable to access certificates on an LDAP server specified using the ldap option: the server address was bad.
(W61) Unable to login to LDAP server: <server name/address>
Smartcrypt was unable to access certificates on an LDAP server specified using the ldap option: the LDAP login failed.
(W62) Central Directory can only be encrypted with strong encryption. Central Directory will not be encrypted.
The cd option was used, which requires strong encryption, but one or both of the following were neither explicitly specified nor configured for use by default: encryption method (passphrase, recipient options), encryption algorithm (cryptalgorithm option).
(W63) You must specify -passphrase or -recipient to encrypt files!
You specified -cryptalgorithm or -cd=encrypt but did not specify either the recipient or passphrase option. Files are not encrypted unless one of these options is used.
(W68) Must specify MailTo, MailFrom and MailServer to email the archive.
You tried to email an archive without specifying all three options MailTo, MailFrom and MailServer. Values for all three must be specified on the command line or configured for use by default.
(W69) Skipping FTP file transfer because of encryption warning XXX.
Smartcrypt encountered a problem encrypting an archive that you directed to send by FTP, so Smartcrypt did not send the archive. This warning occurs if, for example, Smartcrypt can encrypt for only some but not all recipients, or if no passphrase is supplied to use for passphrase encryption.
(W70) Skipping mail file transfer because of encryption warning XXX.
Smartcrypt encountered a problem encrypting an archive that you directed to send by email, so Smartcrypt did not send the archive. This warning occurs if, for example, Smartcrypt can encrypt for only some but not all recipients, or if no passphrase is supplied to use for passphrase encryption.
(W71) Could not attach unzip instructions to the email message
Smartcrypt failed to attach instructions on how to unzip, as specified by the MailOptions option
(W72) Could not find the unzip instructions
Smartcrypt could not find the instructions on how to unzip
(W73) Some of the encryption recipients do not have email addresses
Smartcrypt was told to encrypt for recipients but could not find email addresses for some of the recipients
(W74) Smartcrypt is unable to access the default user's private key.
Smartcrypt is unable to access the private key of the default user. The logon passphrase needed to access the certificate that contains the key may have been reset or changed by an administrator. To fix this warning, the user must change his passphrase from his own computer, rather than let an administrator change it from another system.
(W75) Unable to resolve link: XXXX
While updating an archive, Smartcrypt could not find the original file or the new file
(W76) <certificate> does not pass the strict certificate checks, and will not be used.
The certificate did not pass the strict checking applied by the strict option, used in a command line that updates an archive. The certificate will not be used for the intended signing or encryption..
(W77) [file] was not compressed, because a unique archive could not be created for it.
You used -archiveeach with an -overwrite setting that prevents it from creating an archive.
(W78) Policy error - nnnnn, contact your system administrator
A noncritical problem has occurred with a policy file or policy certificate. Encryption may be disabled. The number is a policy error code to help your administrator resolve the problem.
(W79) Certificate chain is not time nested
A certificate lists a start date or end date that falls outside the period during which an issuing certificate in its trust chain is nominally valid. This may not be cause for concern, but it might indicate a problem.
(W81) Option '[name]' conflicts with current policy.
Your policy requires you to use a particular setting (such as FIPS mode) and you tried to override it.
(W85) Warning! Error shredding file: XXX
You used the shred option, but Smartcrypt was unable to overwrite the file. For example, Smartcrypt can delete a file on a network drive but cannot overwrite its data on disk.
(W86) Extended attributes exceed 64K for file: [name]"
Too many extra fields (such as signing certificates) in a file in the archive.
(W87) Skipping file that is not encrypted with a FIPS-approved algorithm
The same algorithm that was used to encrypt must be used to decrypt. With the fipsmode option, Smartcrypt uses only algorithms that are FIPS-validated for your operating system and skips—does not decrypt—any file that was encrypted using some other algorithm. On Windows 2000, for example, files encrypted with AES algorithms are skipped.
(W88) Warning! Signature cannot be verified, because it does not use a FIPS-approved algorithm
The file is signed, but the fipsmode option was used, and the signature hash algorithm is not FIPS-approved. The SHA-1 algorithm is not approved after 2010. On some versions of Windows, the algorithms SHA-256, SHA-384, and SHA-512 are not approved.
(W89) Invalid owner:[name]
You specified -owner with an invalid user name.
(W90) Invalid group:[name]
You specified -owner with an invalid group name.
(W91) LDAP error. Server:[host], Error:[text]
Problem communicating with LDAP server.
(W92) Warning! File: <file name> is in use by another program. You might have problems opening the archived copy if it is currently saving changes.
You are using the OpenFile option with the prompt sub-option. Choose from the options to Add the open file to your archive.
(W93) Unable to obtain timestamp: <url>
The URL you specified for your Time Stamping Authority (TSA) is missing, incorrect, unavailable, or you are not connected to the Internet.
(W94) Evidence record verification failed
Timestamp hash does not match.
(W95) Evidence record has expired
Last timestamp certificate is no longer valid.
(W96) Evidence record missing file signature(s)
All timestamped files must be signed with the same hash algorithm as the central directory.
(W97) Recipient group item not found: [name]
You used -groupremove and tried to delete a recipient that wasn't in the group.
(W98) Recipient group '[name]' not found
You referred to a nonexistent recipient group.
(W99) Recipient group item already exists: [name]
Tried to add a recipient that was already in the group.
(W101) Your evaluation period for PKZIP has expired. Please register to continue using this product."
Your evaluation period has expired, but the requested operation will still be performed.