Skip to end of metadata
Go to start of metadata
Getting Started
 Minimum Requirements

IBM i Minimum Support Requirements

iSeries OS Version5.3/5.46.17.17.27.3
PKZIP / SecureZIP 9 v9.01H   
PKZIP / SecureZIP 10v10.0.0v10.0.0C   
PKZIP / SecureZIP 10.0.5     
PKZIP / SecureZIP 14     
PKZIP / SecureZIP 15     
PKZIP / Smartcrypt 16     

Hardware Requirements

PKWARE Product / VersionPower 5Power 6Power 7Power 8
PKZIP / SecureZIP 9    
PKZIP / SecureZIP 10    
PKZIP / SecureZIP 10.0.5    
PKZIP / SecureZIP 14    
PKZIP / SecureZIP 15    
PKZIP / Smartcrypt 16    
SupportedNot Supported
 Installers / Maintenance Updates

PKZIP Base and Maintenance Updates

The installation and use of this Software is governed by the existent license agreement between your organization and PKWARE, Inc. Per such agreement, your organization needs to have a current Software maintenance plan to be eligible to download, install, and use this Software update.

I have read and agree to all regulations, laws, terms and conditions listed above.

 

 

 Installation Instructions

Installation instructions are included in the self extracting EXE that contains the install files as Readme.txt

PKZIP for IBM i 16.0.00
 
Copyright 1989-2016 PKWARE, Inc.  All rights reserved.
PKZIP(R) is a registered trademark of PKWARE(R), Inc.
SecureZIP(R) is a registered trademark of PKWARE(R), Inc.
 
Change Font to Arial size 10 for best printing of this document.
 
Last Updated on May 05, 2016.
 
---------------------------------------------------------------------------
I. INTRODUCTION:
---------------------------------------------------------------------------
 
 This README is intended to provide a quick procedure to install PKZIP
 for IBM i version 16.0.0.
 
 This product is designed to run on the following platform(s):
 
   IBM i version 6.1.0 and above (RISC only).
 
 For more information, you may refer to the "PKZIP for IBM i System
 Administrator's Guide".
 
 This README describes the process of installing PKZIP for IBM i, after
 saving the self-extracting zip file to a PC. The process consists of
 building the PKZIP for IBM i 16.0.0 library and licensing PKZIP for
 the trial.
 
---------------------------------------------------------------------------
II. BEGINNING THE INSTALLATION:
---------------------------------------------------------------------------
 
 You should have downloaded a file on your PC called "pkzi1600061.exe".
 This is a self-extracting ZIP file. Once you double-click on the
 file, the files, by default, will extract to C:\PKWARE\pkzi1600061\*.
 
 ---------------------------------------------------------------
 DOCUMENTATION IS DISTRIBUTED IN ADOBE(R) ACROBAT(R) (*.PDF) FORMAT.
 ---------------------------------------------------------------
 The PKZIP for IBM i v16.0.0 portfolio.pdf includes the following:
   PKZIP for IBM i v16.0.0 Users Guide.pdf
   PKZIP for IBM i v16.0.0 Messages Guide.pdf
   PKZIP for IBM i v16.0.0 System Administrators Guide.pdf
 
 The portfolio provides the ability to search one or all manuals.
 If separate manuals are preferred, please contact Technical Support
 at 937.847.2687.
 
 -------------------------------------------------------------------
 TEXT FILES
 -------------------------------------------------------------------
 
 GLOBAL CONTACTS.TXT - A list of domestic and international resellers
 LICENSE.TXT         - PKWARE's software license agreement
 README.TXT          - This file you are reading
 WHATSNEW.TXT        - A text file documenting product changes
 
 -------------------------------------------------------------------
 PRODUCT BINARIES
 -------------------------------------------------------------------
 
 PKW16061P.SAV  - This is the binary SAVF that needs to be
 transferred to the iSeries.
 
---------------------------------------------------------------------------
III. USING FTP TO THE IBM i:
---------------------------------------------------------------------------
 
 After downloading the zip file to your PC extract the save
 file from the zip file. The save file is named PKW16061P.SAV.
 Be sure to note the path to this file, as it will be required
 in your FTP session (defaults to C:\PKWARE\pkzi1600061\PKW16061P.SAV).
 
 Start an iSeries 5250-type session and sign on with sufficient
 authority to perform the commands used below:
 
 Create a save file on the iSeries - CRTSAVF YourLIB/PKZIP1600
 The TCP/IP network server must be running (or start the TCP/IP
 network server with STRTCP).
 
 Start a PC-based FTP session with your normal FTP procedures and
 send the PC file to the iSeries SAVF you created in BINARY mode,
 or run the following:
 
 * Type "FTP" at the command prompt
 
 * Open the iSeries IP Address and sign on
 (ftp> open 208.222.150.11 as an example)
 
 * Next, type "BIN" at the command line
 (this will transfer the file as a Binary object)
 
        * Now type the "PUT" command.  Example:
 
          PUT C:\PKWARE\pkzi1600061\PKW16061P.SAV YourLIB/PKZIP1600
 
        - Note - In the command above:
 
                "C:\PKWARE\pkzi1600061\PKW16061P.SAV"
 
                - Is the local path\file name on the PC
 
                "YourLIB/PKZIP1600"
 
                - Is the remote library/file name on the iSeries.
 
---------------------------------------------------------------------------
IV. RESTORING PKZIP FOR IBM i:
---------------------------------------------------------------------------
 
 Restore the PKZIP for IBM i product from the save file:
 
   RSTLIB SAVLIB(PKW16061P) DEV(*SAVF) SAVF(YourLIB/PKZIP1600)
      RSTLIB(your_pkzip_lib).
 
 (Where "your_pkzip_lib" - is the name you want to call the restored
 library)
 
 There should be a total of 53 objects restored.
 Delete the save file:
 
   DLTF YourLIB/PKZIP1600
 
---------------------------------------------------------------------------
V. INSTALLATION PROCEDURES:
---------------------------------------------------------------------------
 
 At this point, the PKZIP for IBM i product library should exist on the
 IBM i.  The PKZIP for IBM i library should now be added to the
 library list:
 
   ADDLIBLE your_pkzip_lib
 
 If you keep the PKZIP library name as PKW16061P (default), then you do not
 need to take this additional step. If you change the name from PKW16061P
 to something else, then you will need to run this last step.
 
 From the command line, type:
 
   CALL PKZSETLIB your_pkzip_lib
 
 (Where "your_pkzip_lib" is the name of the PKZIP library you restored.
  This will link the objects to your PKZIP library name.)
 
---------------------------------------------------------------------------
VI. INITIALIZING PKZIP FOR IBM i FOR TRIAL:
---------------------------------------------------------------------------
 
 You will need to contact PKWARE, Inc Sales at 937.847.2374, or email
 sales at pksales@pkware.com to initialize your version of PKZIP for
 IBM i for the trial. If you do not work in the USA, please refer
 to the "Global Contacts.txt" file to contact a dealer in your region.
 
 You will need to provide the account manager with a license report.
 To run a license report, please add PKZIP to the library list and
 perform the following:
 
  CALL WHATOSV
 
 Please have the output of this report available when speaking with
 the account rep. You will be expected to supply the following
 additional information:
 
  * Company Name
  * Company Contact
  * Phone number
  * Contact Email
 
 The license keys will be sent via email.  To apply the key simply follow
 the step-by-step instructions contained within the body of the email.
 
---------------------------------------------------------------------------
VII. GETTING HELP WITH YOUR INSTALLATION OR AUTHORIZATION CODE:
---------------------------------------------------------------------------
 
 Prior to contacting PKWARE, Inc. Product Services Division for
 technical assistance please display and review $CONTACT and have
 all required documentation readily available.  To display the
 $CONTACT file run the following:
 
  ===> DSPPFM FILE(your_pkzip_lib/$CONTACT)
 
 Contact Technical Support at www.pkware.com/support/system-i
 or simply call 937.847.2687 if you experience problems during the
 installation process, or if you have any technical questions.
 
 If you have questions concerning general account matters or how to
 obtain an authorization code, please contact Customer Service at
 pkcustomerservice@pkware.com or by phone at 937.847.2374, option 3.
 
 Thank you.
 
 Technical Support
 http://www.pkware.com/support/system-i
 
 PKWARE,Inc.               Tel: +1 937.847.2687
 648 N Plankinton Avenue   WWW: http://www.pkware.com
 Suite 220
 Milwaukee, WI 53203
 USA
 
---------------------------------------------------------------------------
Copyright (c) 1989-2016 PKWARE, Inc. All rights reserved.
Any reproduction or distribution of this content without explicit written
permission of PKWARE is prohibited.
 
The PKWARE name and logo, PKZIP, and SecureZIP are registered trademarks of
PKWARE, Inc. in the United States and elsewhere. Smartcrypt and Smartkeys are
trademarks of PKWARE, Inc. Use of various PKWARE corporate identity assets is
subject to the Branding Guidelines & Terms of PKWARE, Inc. Trademarks of other
companies mentioned appear for identification purposes only and are property of
their respective companies and are hereby acknowledged.
 
Any reference to licensed programs or other material belonging to a third party
is not intended to state or imply that such programs or material are endorsed
by PKWARE, Inc. and/or currently available for use.
---------------------------------------------------------------------------



 

 

Request Help
 Production Down
  • During normal business hours you can call 937-847-2687
  • If you have 24x7 support please call the phone number you were given to have a technician paged.
  • If you do not have 24x7, submit a case via  Request help from a support technician and put PRODUCTION DOWN in the title. A technician will respond as soon as they are available.

Request help from a support technician

 

 

 

 

  • No labels